• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

King 7 X 12 mini Lathe

M

Metalistico

Member
Hey Everyone, i bought a King 7 X 12 Lathe at KMS tools in Edmonton in November, Thing is since i purchased it I've had issues with the drive gear, that melted the belt that stripped itself and now the motor went.
What should i do ? Ask for a replacement Lathe or just keep ordering part's ?
I have maybe 30 hours on this Lathe and am getting frustrate. Please help make a decision.
 
Only 4 months old eh.... I'd ask for a replacement something's not right with it.
 
Metalistico said:
Hey Everyone, i bought a King 7 X 12 Lathe at KMS tools in Edmonton in November, Thing is since i purchased it I've had issues with the drive gear, that melted the belt that stripped itself and now the motor went.
What should i do ? Ask for a replacement Lathe or just keep ordering part's ?
I have maybe 30 hours on this Lathe and am getting frustrate. Please help make a decision.
Click to expand...

The distributor will likely claim abuse and say warranty is void BUT you need to push for replacement under warranty.

If you are lucky enough to have them replace some parts learn from the episode. I've looked at a ton of these lathes and never bought one because they just can't handle any real load. New users push them too hard because it takes a lifetime to machine a part within the abilities of these machines.
 
^ X 2

Replace as much under warranty as you can. Maybe you did get a Friday afternoon machine and once you replace all the parts that are going to break (under warranty hopefully), you’ll be fine.
 
bought it in November, 1 st thing to go was the drive pulley and it chewed up the belt, so i went to KMS and they replaced the parts from another Lathe they had in the store, Now with this motor issue, I'm going to bring the unit in as a whole as there are alot of stress cracks and get this, a big chunk of Bondo feel off of it.
I hope they just give me a new Lathe as this 1 has been nothing but problem's.
And for the member that said they will say it's abuse, you nailed that right, when i went in for the drive pulley thats what they said, thing is, i was turning Aluminum when it happened.
 
You must log in or register to reply here.
Back
Top