• Spring 2024 meetup in Calgary - date Saturday, April 20/2024. discussion Please RSVP Here to confirm and get your invitation and the location details. RSVP NOW so organizers can plan to get sufficient food etc. It's Tomorrow Saturday! you can still RSVP until I stop checking my phone tomorrow More info and agenda
  • We are having email/registration problems again. Diagnosis is underway. New users sorry if you are having trouble getting registered. We are exploring different options to get registered. Contact the forum via another member or on facebook if you're stuck. Update -> we think it is fixed. Let us know if not.
  • Spring meet up in Ontario, April 6/2024. NEW LOCATION See Post #31 Discussion AND THE NEW LOCATION

ISO 5/16ths K style geo die head

mmcmdl

mmcmdl

Machinist/Toolmaker ( retired )
I would ask if all could be on the lookout for the K style head . I think they don't exist down here . I have about 120 sets of useless chasers without the head . TIA Dave

You can pm myself , Dabbler or DavidR8 .
 
Dabbler

Dabbler

ersatz engineer
Can you put the dimensions of one of the 4 chasers, so people can find likely candidates? I don't think I could tell which size a K style head was.
 
mmcmdl

mmcmdl

Machinist/Toolmaker ( retired )
I have never seen this head , but I would assume it is the same physical size as the D style geometrics . I have all D style heads here . The difference with the chasers are D style have slots to mount in the head . The K style has pins . I'll post a pic of the difference in the chasers . I can find lots of information but haven't seen one available anywhere . FWIW , I bought a large box of chasers up at Cabin Fever . On the top were a few D style sets . On the bottom were a 100 or so K style sets .
 
Top