• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Hendey 12 inch Shaper

Collector

Member
Hi guys I have had this for years waiting to retire to work on it looks like it’s about time now. Does anyone have one. It was damaged and the tool head broken off and lost. So need to make one. Would like to have a couple pictures or a head of a donor machine. Made around 1955.
 

Attachments

  • IMG_8762.jpeg
    IMG_8762.jpeg
    5.6 MB · Views: 30
Hi guys
Had some time to draw up what I think will work for the missing parts. I printed the parts. Which gives a good visual start before going to metal parts. I can use these to fit the mating part on the shaper. The screw is bent so I will cut it off and make the top part to socket into the threaded with loctite and pin.
 

Attachments

  • IMG_8788.jpeg
    IMG_8788.jpeg
    1.7 MB · Views: 10
  • IMG_8787.jpeg
    IMG_8787.jpeg
    1.2 MB · Views: 9
  • IMG_8784.jpeg
    IMG_8784.jpeg
    1.2 MB · Views: 10
  • IMG_8776.jpeg
    IMG_8776.jpeg
    4.4 MB · Views: 10
  • IMG_8775.jpeg
    IMG_8775.jpeg
    4.3 MB · Views: 10
Back
Top