• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Hello from KW

Nessie

New Member
Hey folks!

I'm currently living in the Kitchener-Waterloo area of Ontario and am working on expanding my metal working capabilities as my interest in the hobby grows.

My current project is converting a bridgeport mill to run on residential power. I'm really excited about it as I feel it will unlock a lot once I get it running! I hope to post a little write up about the project in the near future.
 
Welcome from (near) Calgary!

I'm in exactly the same situation - I bought an old J-head about a year ago (you can find the thread(s) here if you search "disgusting bridgeport"). I'm rural, there's no 3-phase out here (without spending $125K with the local utility), and since this is my only 3-phase machine tool, I can't (yet) justify either an MG aka RPC or a VFD. So I'm in the slow process of replacing the factory motor with a single-phase. Mine came with the original 575V 3-phase pancake motor. What's the story with yours?

Jonathan
 
Welcome from (near) Calgary!

I'm in exactly the same situation - I bought an old J-head about a year ago (you can find the thread(s) here if you search "disgusting bridgeport"). I'm rural, there's no 3-phase out here (without spending $125K with the local utility), and since this is my only 3-phase machine tool, I can't (yet) justify either an MG aka RPC or a VFD. So I'm in the slow process of replacing the factory motor with a single-phase. Mine came with the original 575V 3-phase pancake motor. What's the story with yours?

Jonathan
The story:

My dad bought the mill a couple months ago as a retirement gift to himself. It will eventually move to the home my parents have retired to. But it's with me for this winter.

It's a J-head with an original motor as well. I'm going the vfd route. I've got a 230v three phase motor that I'll run off of single phase with a vfd.

I should add, I have a mill of my own that I plan to get running as well this winter. Though it's a horizontal mill, which is not as useful for me currently as a vertical mill would be. There are vertical milling head attachments for it but it's from overseas, so trying to find one here is proving to be difficult.
 
Last edited:
Yeah, you're in a little better position than me, since yours is a 230V. All you need is the VFD without step-up.
It's not all sunshine and roses. Buying the 230v motor was fairly cheap, but adapting it to the mill isn't straight forwards. The original 575v bridgeport motor isn't a standard frame size I can find easily. So I have had to come up with a custom bracket to mount the new motor. Which would have been a lot easier to fabricate if I had a working mill
 
Oh - I thought you meant the factory motor was 230V. Then we're in almost the same situation - another member here sold me a 120/220 motor, but we're still in the agonizing throes of making the adapter plate.
 
Welcome from Ontario farm country south of Chatham.

Most of these motor problems will seem trivial once you get the mill working.

Lots and lots of threads on here that detail how to solve every problem you could imagine. If you can't figure it out post about it and someone will help you out.
 
It's not all sunshine and roses. Buying the 230v motor was fairly cheap, but adapting it to the mill isn't straight forwards. The original 575v bridgeport motor isn't a standard frame size I can find easily. So I have had to come up with a custom bracket to mount the new motor. Which would have been a lot easier to fabricate if I had a working mill
There’s a hole in a bucket rat hole thing. Lean on the forum for machining time. My mill is working again so I guess I volunteered. 🙂
 
It's not all sunshine and roses. Buying the 230v motor was fairly cheap, but adapting it to the mill isn't straight forwards. The original 575v bridgeport motor isn't a standard frame size I can find easily. So I have had to come up with a custom bracket to mount the new motor. Which would have been a lot easier to fabricate if I had a working mill

Here is a link to my adventures doing the same thing. This link drops you right into the process of making an adapter plate. I didn't have a working mill to do this either. If you enjoy reading about such things you can rewind to the first post of the thread, or you can skip forward to the plate itself.

The journey was worth it. I love my mill !!!

https://canadianhobbymetalworkers.com/threads/new-to-me-hartford-mill.3490/post-47104
 
Back
Top