-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Flange Bearings
- Thread starter Martin w
- Start date
Ironman
Ultra Member
In my case I wondered the same thing.
I have one customer, a seed cleaning plant and often their shafts are bent. and then the grease gets a workout til the housing wears. The other thing that happens is the bearing sizes and then rotates in the flange, and it is run that way til end of season. I grow garlic commercially and just finished building a garlic cleaner, using PA flanges, and in this case, it will prevent rust between bearing and flange so I can replace the bearing without a fight.
I have one customer, a seed cleaning plant and often their shafts are bent. and then the grease gets a workout til the housing wears. The other thing that happens is the bearing sizes and then rotates in the flange, and it is run that way til end of season. I grow garlic commercially and just finished building a garlic cleaner, using PA flanges, and in this case, it will prevent rust between bearing and flange so I can replace the bearing without a fight.
MrWhoopee
Active Member
Sounds like a classic case of reproducing a part without understanding its function. Much like the import 1-2-3 blocks with tapped holes that you still can't bolt together.