• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Colchester Master lathe $2000 Victoria

David

David

Scrap maker
Administrator
Moderator
Premium Member

Facebook

www.facebook.com www.facebook.com
IMG_2142.png
 
mickeyf said:
I think 6-1/2 means 13 in North American, yes?
Click to expand...
Yeah.

The English tend to use center height, as a reference point, while the US practice was to use the maximum swing that the lathe could deal with, but you have to watch the numbers for what it will actually swing over the carriage! Some manufacturers touted the maximum diameter disk the lathe could swing over the bedways or in the gap,, if so equipped, while some used what the machine could swing between centers... www.lathes.co.uk is a pretty decent reference if you are shopping! They cover just about everything that might ever interest a hobbyist, or Farm Shop kind of size range.
 
So 13x30 probably, gap bed, gap is there on tray, imperial and metric threads, hardened ways, gamet bearings, tailstock, 2.0625 bore, my guess would be 1200 top rpm.
Very nice
 
You must log in or register to reply here.
Back
Top