• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Bernerd D1-4 Collet Chuck

jgimp69

Well-Known Member
I'm throwing this back out here. I tried selling it last year but the deal fell though and got tired of tire kickers, so I took it down...

Burnerd collet chuck with a D1-4 camlock mount. Collets to 1-1/2”. Some normal wear but in good condition. I did a runout check in my lathe on the taper and the indicator didn’t even move. I have a vid but it wouldn’t let me load it.
Looking for $450 but very willing to trade for something I would use more often. Looking for sine plate, vee blocks, angle plates, larger dial/digital calipers (12-24”), 3-6” outside mic’s, 5C spin indexer machinist made setup blocks/larger parallels etc or make an offer.
I really don’t want to sell it but would rather repurpose it’s use to enable me to get something I would use more often.

Located in the Goderich Ont area but do travel in the Southern Ontario area frequently so may be able to meet up or deliver depending on location

47901-e81c49742a4811f3b401721b05ba6c7b.jpg
47902-ade1fb110d8f70addbecc3d31796ba8a.jpg
 
IMO, the collets alone are worth what you are asking. You may want to state if that is a KC-15 set, or something else. Closers for different spindle types come up frequently. Probably just the angle of pic, but I cannot tell if you have the nose piece to draw in the collet?
 
IMO, the collets alone are worth what you are asking. You may want to state if that is a KC-15 set, or something else. Closers for different spindle types come up frequently. Probably just the angle of pic, but I cannot tell if you have the nose piece to draw in the collet?
It does have the closing nut and wrench. Just the angle of the pic. Not entirely sure of the model #. I can break out the magnifier and see what I can read on it.
The price is right for sure, just figure someone from here can give it a better home.
 
Back
Top