• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Another way to use a lathe as a shaper

I always use gloves ehn using the lathe. With flying hot chips it is unsafe not to.
 
I don’t trust gloves / rags at all around Machines i've seen that video its true when I was 17 I had a job at the paper and while cleaning blankets the rag got caught pulling me in I pulled back and luckily I only lost 2 fingernails! They would have been crushed to approximately 1/8 of a inch! At the Calgary Herald we basically had a 9 / 9-1/2 club.
 
I feel the Chewey incident is very regrettable. Each safety system has to be consistent in its rules. The way I was taught and practice, there is no possibility that that could happen. There is no excuse for ever having any part of your body within 6" of any moving part of a lathe or mill. On my 7.5 HP lathe, getting caught like that would mean a quick death.

I've seen Joe Pie and others use a file right handed, reaching over the chuck. I would have been instantly fired if I ever was seen doing that. (And I never would - using a file left handed is a necessary lathe skill IMO)

Yet Chewy, Joe pie an others are very skilled, and each has their own rules. The problems begin if you add inconsistent allowables or restrictions. Then you find yourself compromising to get the work done. That's when you get hurt. I have considerable respect for other ways of doing things, as long as safety is preserved.
 
And all of my 'left handed files" that come anywhere close to the lathe have a drilled golf ball hammered over the file tail. even the ones that come with a wooden handle that can splinter are removed and a ball replaces it.
 
You must log in or register to reply here.
Back
Top