8” 4 Jaw D1-3 backing

[BaitMaster]

Large chuck, came with my lathe. The way it’s setup right now it’s on a D1-3 backplate…..I’ll keep the plate if you don’t want it, the chuck itself is threaded.

Not very true to the D1-3 adaptor and no through hole. Would be fine for going slow.. or if you have an old atlas or a threaded chuck this one’s for you.

100$ plus shipping.

 

[van123d]

Pm sent.

 

[YYCHM]

What dia. and TPI is the chuck threaded for?

 

[BaitMaster]

What dia. and TPI is the chuck threaded for?

I don’t know. I have someone who said he’ll take it so if he doesn’t end up taking it then I’ll take it apart for you.

 

[Brent H]

The D1-3 “adaptor” plate looks like the “face plate” the lathe came with and the 4 jaw was poorly adapted to it.

Very cool to have the original face plate for a Utilathe.

Just saying

 

[BaitMaster]

The D1-3 “adaptor” plate looks like the “face plate” the lathe came with and the 4 jaw was poorly adapted to it.

Very cool to have the original face plate for a Utilathe.

Just saying

I have another faceplate i got with the lathe as well. Not sure how to tell which one is original

 

[Brent H]

The one in your pics shows that it has the slots for the lathe dogs. Hard to say but a D1-3 integral face plate is cool. I have a D1-3 mount to a plate.