4 jaw lathe chuck
- Thread starter Tomc938
- Start date
Backplate is needed. Typical Chinese import style. Can't find the specs in the manual. (of course)
There is information on sizes in this thread for the b2227l.
I have been looking for one as well for my b2227L I was looking at both the 5 and 6 inch at BB they were the same price, banggood has a 4 jaw independent but they haven't had stock in a long while they also have a self centering but I I think a person wants a independent there are tons on aliexpress but shipping is pricey.
Collet Chuck information | Canadian Hobby Metal Workers & Machinists
I have been looking for one as well for my b2227L I was looking at both the 5 and 6 inch at BB they were the same price, banggood has a 4 jaw independent but they haven't had stock in a long while they also have a self centering but I I think a person wants a independent there are tons on aliexpress but shipping is pricey.
Collet Chuck information | Canadian Hobby Metal Workers & Machinists
Back plate? What kind of back plate? Post an image of your 3J.
Unless it really old, chucks are pretty much standardized.....
Lathe Chucks - LittleMachineShop.com
Last edited:
These are from post #49 of the link I posted.
Its a 3 bolt from the back and most chucks are 4 holes thus the need for the backplate.
Even the ones you get from BB need a backplate.
Its a 3 bolt from the back and most chucks are 4 holes thus the need for the backplate.
Even the ones you get from BB need a backplate.
No its separate I believe bb sells them as well, my plan is to make my own there is also people selling backing plates on ebay and ali express. The point was that not very many 3 bolt options out there that I could find.
Boy..... that's a very deceiving description on BB's part. And looking at the LMS chuck specs the 4J's are 4 bolt. As I recollect the 4J I got for my my 7X12 was setup for 3 or 4 bolts or maybe that was the spindle mount plate I'm thinking of?
Last edited:
That's why I posed the question. I was going to suggest maybe this LMS adapter plate, but even that doesn't make sense against your spindle plate picture because the 3-hole & 4-hole patterns share a hole?
https://littlemachineshop.com/products/product_view.php?ProductID=2961
One would think something must be out there, its a common chuck & a common lathe.
https://littlemachineshop.com/products/product_view.php?ProductID=2961
One would think something must be out there, its a common chuck & a common lathe.
Attachments
darrin1200
Darrin
As far as I can tell, this is the adapter for the lathe indicated by the model of the chuck.
https://www.busybeetools.com/products/face-plate-for-cx708.html
Perhaps it comes with the adapter for the older lathe. Because of the confusion, I would really suggest giving your local Busy Bee a call and asking. I have usually found them to be very helpful. I just wish I had one closer.
https://www.busybeetools.com/products/face-plate-for-cx708.html
Perhaps it comes with the adapter for the older lathe. Because of the confusion, I would really suggest giving your local Busy Bee a call and asking. I have usually found them to be very helpful. I just wish I had one closer.
That's a face plate not a chuck adapter.
darrin1200
Darrin
OOOOPs. should have had my coffee first.
I was thinking of giving them a call tomorrow. Best to talk to someone and see what is and isn't included.
I asked BB about them as usual they are out of stock till ?
My lathe is a D1-5. It isn't the most popular size around. So I've had to adapt various work holders to it. I've had pretty good success making my own backplates and adapters usually by buying and modifying an existing one. For example getting a bigger one and making it smaller. Or modifying an existing D1-5 backplate to fit whatever I need. The biggest problem has always been the mounting holes. I'm hoping a DRO on one of my mills will improve that process.