3" x 3" bar aluminum

[DPittman]

Anyone have a line on a small quantity of bar stock aluminum approx 3"x 3". I only need a 3" chunk of it but would buy maybe 8-12" if available. I'm wanting to make a "tool holder" for a die grinder.

Don

 

[Tom Kitta]

I may have some aluminium round bar & you would have to make it square out of it. Everyone in Calgary seems to have plenty of round stuff but square stock is very, very hard to come by.

 

[DPittman]

Yes I think my brother might have some round stock as well but I am thinking I will start with square. Thanks tho!

 

[PeterT]

I've only seen sizes like at from the more encompassing suppliers, at least in shorter lengths. These are USD prices, add semi-discounted UPS shipping.
https://www.onlinemetals.com/merchant.cfm?pid=1122&step=4&showunits=inches&id=999&top_cat=60

3x3 from round would have to be this kind of diameter +/- milling vs saw kerf & chamfer allowance etc.