• Spring 2024 meetup in Calgary - date Saturday, April 20/2024. discussion Please RSVP Here to confirm and get your invitation and the location details. RSVP NOW so organizers can plan to get sufficient food etc. It's Tomorrow Saturday! you can still RSVP until I stop checking my phone tomorrow More info and agenda
  • We are having email/registration problems again. Diagnosis is underway. New users sorry if you are having trouble getting registered. We are exploring different options to get registered. Contact the forum via another member or on facebook if you're stuck. Update -> we think it is fixed. Let us know if not.
  • Spring meet up in Ontario, April 6/2024. NEW LOCATION See Post #31 Discussion AND THE NEW LOCATION

Search results

  1. T

    Aluminum surface finish from needle scaler

    Random orbital sanders give a very nice finish on aluminium.
  2. T

    Some lathe mods and additions.

    A few mods and additions I’ve made to my lathe. Hopefully, they may help someone out with ideas. Tool shelf above lathe for metric and imperial drill bits. Carriage clamp, a lot better than the single Allen key clamp. An extension bolt with lever for the change gears, saves searching for a...
  3. T

    Tool DRO fitted.

    Get some Chinese 3M, it just falls off when you touch it.
  4. T

    Tool DRO fitted.

    Good tip, I was thinking of using the cheap flexible coolant hose, but this look better. My tip for you: I have a couple of these flexible coolant hoses on my lathe, but they leak after a while, so I thread 5mm plastic hose through them, which renders the tap at the base useless, and fix a...
  5. T

    Tool DRO fitted.

    I'm actually a sandgroper, lived my first 25 years in Perth. I left in 75 and spent the next 25 years moving around Oz and overseas, moved back to Perth in 2000 when I retired but moved back East again six years later. We live in Adelaide now. My wife and I flew to Perth a few months ago for...
  6. T

    Tool DRO fitted.

    They're very popular in Oz, many other Chinese brands have disappeared.
  7. T

    Tool DRO fitted.

    I made a couple of small sensor brackets out of 2mm ally today, fitted one at the front under an ally U chanel. The other bracket and sensor is fitted on the cross slide and the magnetic strip stuck on the base of the mill. If swarf presents a problem its a minor job to fabricate a guard over...
  8. T

    Product Digital linear scale.

    I bought this DRO on aliexpressvwith the intention of fitting it to my lathe. Changed my mind and I'm now fitting it to my mill. I have the X axis fitted and a bracket made for the readout, tomorrow I'll mount the readout and look at fitting the Y feed axis. It's actually for woodworking as...
  9. T

    Clutch slave number two.

    Previously I made a clutch slave with a 25mm piston. I bought a 9.5mm master cylinder and hooked it up. No go, the master only moved the slave piston a little under 1mm, not enough to separate the plates, so, back on the lathe. I had a couple of 20mm hydraulic ram seals so turned up a slave...
  10. T

    DIY tool holders.

    I have insert holders as well, rarely use them. If I can use HSS, that's my choice,
Top