• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Search results

  1. I

    Surface Grinder Adapter Balancing Rings

    just put some epoxy both sides of the wheel and about 1/2" from the circumference. The added distance from the axis will require much less absolute weight and it will take a lot of redressing due to use before you get anywhere near the epoxy.
  2. I

    Tool Collets for small bore D bit grinder Deckel Alexander

    Someone here has a D bit grinder that uses the smaller (16mm) collets. Here are some available on eBay at a reasonable price. https://www.ebay.com/itm/186129112360 If that does not get you there, here is the title Deckel Cutter Grinder Economy Collets Inch Round- -Used
  3. I

    Surface Grinder Adapter Balancing Rings

    I don't do a lot of wheels, but I have had good luck by putting a patch of 5 min epoxy on the light side of the wheel. If that is still too light, it can extend it into an arc. Once over corrected, it can be teased back with a dremel tool with a sanding drum. Quick, cheap, infinitely adjustable...
  4. I

    Quick change tool holders

    Toolholders arrived and cleaned up very nicely. Fit my toolpost perfectly. Very appreciative of the comradery in the forum. Attaching a picture
  5. I

    Quick change tool holders

    I have the toolpost for this size of holder. Would you be willing to mail them to Alberta? I can pay the cost by electronic transfer. Ian in Sherwood Park, Alberta (bedroom community for Edmonton)
  6. I

    Help me make my lathe better

    This is definitely a L0 (ell zero) or at most a L1 long taper spindle. That is what I have on my lathe. It is a good system in my opinion. The threaded portion on the chuck may be integral with the chuck or a separate backplate. Of course, the taper needs to be absolutely clean on both parts...
  7. I

    Machine Parts...help me clear my shop of things I will never use.

    Someone asked if I would ship and, I would consider it. But I read the request yesterday but can't find it again today to answer. Please contact me again.
  8. I

    Machine Parts...help me clear my shop of things I will never use.

    Yours for free. Sherwood Park/Edmonton area. 1) Carriage from small mystery lathe. Cross feed nut missing, gib missing from cross feed. Compound is complete. 2)Carriage feed shaft. May be from the same lathe. 1/2" x 25" acme thread 1/2 16 tpi. 3) Two acme thread shafts, 8 inc and 4 inch, 5/16"...
  9. I

    Bandsaw blades free except for shipping

    Blades arrived, thank you. Pretty serious rust though. Not sure how I am going to deal with that.
  10. I

    5c collet nose adaptor for lathe spindle

    I would like to be second-in-line consideration for the MT5 to 5C adapter.
Back
Top