Search results

You have a sharp eye!

I use the SMW two-part vices and their M6 locating studs with this table.

No slots! I made this table from an 9" x 1" cast iron disk with the tooling holes on a 20x20mm grid. I find this to be much more versatile than the traditional T slots. These use M6 screws and all the fittings can be used on all my machines. I can easily attach a small vice, squares and...

What is happening here are small bits of filament that drop off and add to the surface. On the P1S (X1 too) you should enable the Prime Tower. Now if you don't have an AMS, then after enabling Prime Tower, select with the dropdown, Timelapse - SMOOTH. This will force the tower and remove most...

The DYMO tapes are also a plastic film with decent adhesive. I haven't had any difficulty removing them at all.

Plain ordinary PLA is brittle, yet quite stiff. PLA+ or PLA Professional is less brittle, and it will deform slightly before fracturing which seems to make it "stronger". For sections like the one you show there, the print orientation - i.e. the layer direction vs. the strain direction is...

Well its a tube that shrinks that you can print on first...

This is my third or fourth label printer and it seems to be much more rugged than the Brother equivalents. Decent sized keyboard and a good selection of fonts and styles. It has preset styles for wiring tags, breakers, flags, etc. I bought this specifically because there are shrink tube...

Well, I bought a Bambu P1S 2 weeks ago (after my Ender threw a final hissy fit) and I have to say it is a very impressive piece of kit for $890 including taxes & delivery. I bought the plain jane version without the multi-filament feeder (called the AMS) since I have no interest in the extra...

Yes they will be "close enough". These are change gears, right? So that last few tenths isn't doing anything for you. Just make sure theres enough play beween gear teeth and they will work perfectly.