PaulL's latest activity

Decided to forego the tools of the trade show today and finish this up. Started off taking all the parts cut last weekend out back...

Finally had some shop time today after a few weeks away. Cleaned up a bunch, Spent an hour cleaning the surface grinder (still no end...

Back when Ontario started a glass and plastic recycling program, most proponents suggested copying the pairie provinces. But our guys...

We'll try for August.

Relaxing today after arriving in Calgary at 1AM. Just over 10,200km total in 18 days. I wan to thank everyone that opened their shop...

Taig or Unimat. Looks like both are available.

Wanna borrow my Taig?

Well fsck. Ok, don't make it that way. Do the thick part first and hold it by the 1/2" long thicker section? That doesn't leave me...

Shark bite is just my latest fiasco. Crimp rings are my biggest fiasco.

Goofy but successfull idea for cable protection: metal flexible hose from a hand shower. Very floppy, won’t kink, cheap. Only tricky bit...

I made a couple of small sensor brackets out of 2mm ally today, fitted one at the front under an ally U chanel. The other bracket and...

I'm having the same doubt. The line of tape I applied to my cross-slide is coming away after about 6 months. A mess, frankly. I'm...

Ordered and MX 8x14 from Vevor on a Thursday. The delivery process was great. They delivered it by UPS on the stated date, midday, 5...

I'll chime in here as I've bought some substantial tools from Vevor. My mag drill is an impressive bit of kit. Likewise the annular...

Hopefully she's not planning your untimely demise, just planning in case of it. I have had the same thoughts about what to do with all...