-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
-
The 2026 Calgary Area Meetup is set for Saturday May 30th at 10am. The signup thread is here! Robinhood has graciously offered to host the meetup again this year. Please note that you MUST RSVP to the notice linked above if you wish to come.
Latest activity
-
AAntaresSky replied to the thread Machine Unimat 3.I have a unimat 3 with an upgraded 150 watt DC motor. I drilled and taped the existing motor pulls and used a grub screw to allow it to...
-
PPeterT replied to the thread Tool Vertical Spindexer.Yes, good idea. If I could convince myself I could open the hole exactly concentric to the existing hole(s). Number zero on the rotating...
-
How about inserting a hardened bush(s) into the location(s) that you use the most? This is analogous to using AL plate with steel... -
PPeterT replied to the thread Tool Vertical Spindexer.And now I must forever refrain using the word prismatic when it comes to flat faced jaws with, lets call it 'angled' back faces. Even...
-
-
PPeterT replied to the thread Tool Vertical Spindexer.Well there is no spring in the Bison documentation so I must have been hallucinating about something else. They do make an issue about...
-
-
RobinHood replied to the thread Tool Vertical Spindexer.How about inserting a hardened bush(s) into the location(s) that you use the most? This is analogous to using AL plate with steel... -
Had this little television lying around and decided to put it to good use. Plays music (though sound is poor), displays text, shows...
