• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Calgary Area Meetup is set for Saturday July 12th at 10am. The signup thread is here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Two for the price of one.

slow-poke

slow-poke

Ultra Member
I needed a 48 tooth aluminum or steel timing pulley to replace the 3D printed timing pulley I used to test out the CNC knee conversion. These large pulleys can be on the expensive side. I found a used but new pulley on eBay for a good price, however it was 60mm thick! Tested the limits of my 5x6" bandsaw.

I think I will sell the unused half.

____48_AT10.jpg
_48_AT10_1.jpg
 
You must log in or register to reply here.
Back
Top