Base Machine:
-CL644Y, 12 speed, 36" bed, 120v, ~1963 vintage
-tailstock (MT2), c/w wrench
-lantern style tool post, c/w 5 holders, knurler
-carriage lock wrench
Tooling:
-1/2" Jacob's chuck on MT2, c/w key
-Shars live center on MT2, new
-Rotor live center on MT2, needs bearings
-5" faceplate, c/w 2 lathe dogs
-Pratt Burnerd 6644 6" 4 jaw chuck, c/w key, like new
-Bison PUUm-S5 5" 3 jaw chuck, c/w 2 sets jaws, key, like new
-Precision MS3-QCC-160 5" 3 jaw chuck on MT3, threaded for drawbar (for reverse rotation work), new
-Burnerd Model 30 5" 3 jaw chuck
-Cushman Model 5340B 5" 3 jaw chuck
Upgrades:
-QCTP, AXA, c/w 26 holders (10 Accusize, 16 generic) & 12 printed holder mounts, plus Klein 4mm hex wrench, 1-1/8" combination wrench
-3 Accusize insert holders, c/w 2 inserts each
-serpentine belt drive
-2 countershaft drip feed oilers (not installed)
-spindle shaft thrust bearing (Torrington)
-spindle thread protector, 1-1/2"x8TPI
-printed metric threading gear
-new motor drive belt
Bonus schtuff:
-1HP, 3Ph Rockwell electric motor to herd you towards a VFD
-4"x8"x3/8"x43" long rectangular steel tube, plus enough 3"x4"x1/4" angle to make a new stand
-A, B, C lubes, ~1 pint each
-compound hex wrench, 3/16", Klein
Good working condition. All gear teeth present & accounted for. I believe this lathe came from my local high school. In the mid to late 70's it sat there in shop class, unplugged. It remained unused until it was auctioned off in the 00's. It probably only saw about a decade of school use. A local farmer bought it where it saw very light use until I purchased it 3 years ago.
I don't have photos of the oilers, steel tube & angle or the MT3 chuck (link provided). The only tool bits coming w/ it will be the 6 inserts and one 1/4" HSS.
Reason for selling: bought @BaitMaster's SM1230.
Asking $2500. I'll leave the ad here for a week or so, then move it to Kijiji for $2800. I'm in the Lethbridge area. Viewings available eves & weekends.
-CL644Y, 12 speed, 36" bed, 120v, ~1963 vintage
-tailstock (MT2), c/w wrench
-lantern style tool post, c/w 5 holders, knurler
-carriage lock wrench
Tooling:
-1/2" Jacob's chuck on MT2, c/w key
-Shars live center on MT2, new
-Rotor live center on MT2, needs bearings
-5" faceplate, c/w 2 lathe dogs
-Pratt Burnerd 6644 6" 4 jaw chuck, c/w key, like new
-Bison PUUm-S5 5" 3 jaw chuck, c/w 2 sets jaws, key, like new
-Precision MS3-QCC-160 5" 3 jaw chuck on MT3, threaded for drawbar (for reverse rotation work), new
-Burnerd Model 30 5" 3 jaw chuck
-Cushman Model 5340B 5" 3 jaw chuck
Upgrades:
-QCTP, AXA, c/w 26 holders (10 Accusize, 16 generic) & 12 printed holder mounts, plus Klein 4mm hex wrench, 1-1/8" combination wrench
-3 Accusize insert holders, c/w 2 inserts each
-serpentine belt drive
-2 countershaft drip feed oilers (not installed)
-spindle shaft thrust bearing (Torrington)
-spindle thread protector, 1-1/2"x8TPI
-printed metric threading gear
-new motor drive belt
Bonus schtuff:
-1HP, 3Ph Rockwell electric motor to herd you towards a VFD
-4"x8"x3/8"x43" long rectangular steel tube, plus enough 3"x4"x1/4" angle to make a new stand
-A, B, C lubes, ~1 pint each
-compound hex wrench, 3/16", Klein
Good working condition. All gear teeth present & accounted for. I believe this lathe came from my local high school. In the mid to late 70's it sat there in shop class, unplugged. It remained unused until it was auctioned off in the 00's. It probably only saw about a decade of school use. A local farmer bought it where it saw very light use until I purchased it 3 years ago.
I don't have photos of the oilers, steel tube & angle or the MT3 chuck (link provided). The only tool bits coming w/ it will be the 6 inserts and one 1/4" HSS.
Reason for selling: bought @BaitMaster's SM1230.
Asking $2500. I'll leave the ad here for a week or so, then move it to Kijiji for $2800. I'm in the Lethbridge area. Viewings available eves & weekends.
