mickeyf
Super User
Round column, MT 3 spindle
Geared head, 6 speeds 60-1500 RPM
1 HP single phase motor (Baldor) currently wired for 120V, can be for 240V
Not wired with reversing switch
5 in./13 cm Quill travel
21cm x 73cm table ( Approx 8-1/4 x 28-3/4)
Approximately 45 cm (18 inches) maximum spindle to table clearance,
before subtracting tool stick out
Includes Hymseann DRO, X&Y scales installed. Z included but not installed.
end mill holders for 3/8, 1/2, 5/8, 3/4, 7/8 and 1 inch
Includes 5/8, 3/4, 7/8 and 1 inch end mills
(3/8 and 1/2 end mill holders are commercially made, larger ones are shop made)
1/2 in. Jacobs chuck
Carbide insert face mill with extra inserts
Boring head
Metric draw bar (M12) for insert face mill & boring head
3/8 in draw bar for everything else
spindle wrench
couple of slitting saws and funky holder
Shop made fly cutter
Shop made spindle wrench
cup wheel
task light
Vise and hold down clamp kit not included.
I moved this on an ordinary furniture dolly by removing the motor, table and head, then lifting the head with an engine lift to re-assemble it.
I have other tools I expect to put up for sale in the next while as I get organized, but feel free to ask now.
Geared head, 6 speeds 60-1500 RPM
1 HP single phase motor (Baldor) currently wired for 120V, can be for 240V
Not wired with reversing switch
5 in./13 cm Quill travel
21cm x 73cm table ( Approx 8-1/4 x 28-3/4)
Approximately 45 cm (18 inches) maximum spindle to table clearance,
before subtracting tool stick out
Includes Hymseann DRO, X&Y scales installed. Z included but not installed.
end mill holders for 3/8, 1/2, 5/8, 3/4, 7/8 and 1 inch
Includes 5/8, 3/4, 7/8 and 1 inch end mills
(3/8 and 1/2 end mill holders are commercially made, larger ones are shop made)
1/2 in. Jacobs chuck
Carbide insert face mill with extra inserts
Boring head
Metric draw bar (M12) for insert face mill & boring head
3/8 in draw bar for everything else
spindle wrench
couple of slitting saws and funky holder
Shop made fly cutter
Shop made spindle wrench
cup wheel
task light
Vise and hold down clamp kit not included.
I moved this on an ordinary furniture dolly by removing the motor, table and head, then lifting the head with an engine lift to re-assemble it.
I have other tools I expect to put up for sale in the next while as I get organized, but feel free to ask now.
Last edited by a moderator:
