• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Replacing oil lines

skippyelwell

skippyelwell

Ultra Member
The oil in the oiling system has congealed to the point that I will have to replace them all, I've been looking around but not seeing much that looks the same.
The flexible hose is 4mm OD, 2mm ID, and probably have to replacing the fittings, do these look familiar to anyone?
Thanks
 

Attachments

  • IMG_1158.JPG
    IMG_1158.JPG
    1.2 MB · Views: 26
  • IMG_1159.JPG
    IMG_1159.JPG
    1.7 MB · Views: 26
skippyelwell said:
The oil in the oiling system has congealed to the point that I will have to replace them all, I've been looking around but not seeing much that looks the same.
The flexible hose is 4mm OD, 2mm ID, and probably have to replacing the fittings, do these look familiar to anyone?
Thanks
Click to expand...
one on top is push to connect fitting, and the other is a compression fitting.

what is the thread 1/4"?

they both look different to me. But get me the threads and I'll get you a link to buy the right size like this

 
the flexible hose and push to connect fittings look like pneumatic stuff, if thats the case its pretty easy to get, it would just be a question of how much pressure those lines see from your little hand pump
 
The fact that these fittings were used on flexible line, I don't think the ferrules distorted much . If you can pull the ferrule or the tube insert and remove the flexible tubing, I would just clean them up and re-use the fittings.
 
"push to connect" fittings, I've used them on a mill's oiler with success. It was so much easier to install than copper and compression.

IMO it needs meters on each output line, like a Bijur. Maybe they are already there installed at the other end of the output line, but they are rather critical. You can read about them here:


They create an equal resistance (or unequal if you want more oil in one area, i.e. they come with different resistances). If you don't use these or something similar, the flow will almost all go to the line of least resistance. It will get all the oil and the other path's none
 
Last edited:
You must log in or register to reply here.
Back
Top