• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Tool Needing a press

Tool
MashingMetal

MashingMetal

Super User
I’m at the point of replacing the spindle bearings for the mill/drill in the rebuild process. I have always got by with medium sized arbor press but I need something larger. How big do I need 20t? I don’t need anything huge but I don’t want anything undersized either.
Thanks!
 

Attachments

  • IMG_8677.jpeg
    IMG_8677.jpeg
    1.9 MB · Views: 13
I don’t think you will need a 20 ton. You should be able to get the bearing races out fairly easy. With a block of dowel and a hammer. I guess you could press them out others have. I followed these directions when I did mine.
Post using a press.

Spindle Bearing Replacement For The Rf-31 Mill/drill

During my quest to eliminate the excessive runout on my RF-31 Mill/Drill I determined that the spindle bearings were a major contributor. As you can see, these bearings have seen better days. In addition to being filthy, they have not been maintained and have worn much earlier than they should...
www.hobby-machinist.com
 
My experience with bearings or any size is that none of them require a great deal of pressure to either press in or to remove. If you are talking about "how much physical space do I need to position the thing in the press" that may be another story. Have you tried with the arbor press and it didn't have the oomph?
 
i also dont think you will need much tonnage to actually press the bearings, but you might need a 20t or more to have a large enough frame to fit that whole shebang in
 
Here an excellent write-up on replacing bearings on an RF30/clone

Spindle Bearing Replacement For The Rf-31 Mill/drill

During my quest to eliminate the excessive runout on my RF-31 Mill/Drill I determined that the spindle bearings were a major contributor. As you can see, these bearings have seen better days. In addition to being filthy, they have not been maintained and have worn much earlier than they should...
www.hobby-machinist.com
 
mickeyf said:
My experience with bearings or any size is that none of them require a great deal of pressure to either press in or to remove. If you are talking about "how much physical space do I need to position the thing in the press" that may be another story. Have you tried with the arbor press and it didn't have the oomph?
Click to expand...
My arbor press does have the hight unfortunately, it’s good for about 10”
 
Last edited:
I have a limited number of sizes of bushings (to push on the bearing). I do have a set of 3/4” sockets and they work well to act as a bushing. Don’t forget- heat is your friend. You may have to make a custom bushing.
You have my contact info/address (from meetup carpool) so let me know if you want to give it a try.

CW
 
Q1) Dumb question but what is the driving parameter that defines the rated capacity of these rack & pinion style presses? Example a 1-ton is 2000 pounds. Is that the maximum shear force of the engaged pinion teeth? I cant imagine the say 1"x1" solid steel arbor is anywhere close to failing or distorting in compression. The C-frame is probably deflecting a bit but they don't exactly look like precision instruments for how the arbor is set perpendicular to plate (or maybe that's the just the ones I'm looking at haha).

Q2) I haven't seen many pics where people attach an accessory on the end of the arbor to suite an application. Lets say you need a smaller circular press profile. Do you just rest that under the square arbor face or is there a hole in the end to capture various shop made profiles?

Q3) I got looking at the size of even small presses compared to the length of broaches. Even a 2-3mm wide broach is 5-6" long. Seems to me that requirement puts you into a larger press? Shallow bearings etc. can be handled OK but broaching seems to be a different animal?

1746986862771.png
 
You must log in or register to reply here.
Back
Top