• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Lathe $500 Edmonton

combustable herbage

combustable herbage

Ultra Member
Premium Member
Lathe $500 or best offer | Power Tools | Edmonton | Kijiji

As Tom would say might as well be free.

1631366571375.webp
 
Exact same lathe as i have other than it is missing the chip pan that came with them.

i havent read the add but am surmising by a couple of posts concerning a shear pin that it doesnt turn the headstock....it could be a shear pin ( I wouldnt know even where it is as I have never broken one) but , from My experience with that very lathe, it is possible that the gear change forks have loosened from the shifting shaft....quite common with these lathes.....1/2 hr fix.
 
historicalarms said:
Exact same lathe as i have other than it is missing the chip pan that came with them.

i havent read the add but am surmising by a couple of posts concerning a shear pin that it doesnt turn the headstock....it could be a shear pin ( I wouldnt know even where it is as I have never broken one) but , from My experience with that very lathe, it is possible that the gear change forks have loosened from the shifting shaft....quite common with these lathes.....1/2 hr fix.
Click to expand...

Also missing is the kick board divider between the two stands, pretty much the only real benefit to having it is it sturdies up the lathe stands
 
You must log in or register to reply here.
Back
Top