• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Horizontal milling cutters and arbors.

Johnwa

Johnwa

Ultra Member

Attachments

  • 1618875083391.jpg
    1618875083391.jpg
    64.8 KB · Views: 18
Guy is playing games - buyer beware!

I messaged the guy asking is it NMTB 40. Then I saw it pending. Then I messaged again as to whatever it is sold. No reply. Nothing. Now it is back 4 weeks later.

It was already posted on this board once, 5 weeks ago in same section!

Well I got my 40 taper 1 1/4 inch arbor in the mail from the US. Cost me 100 CAD with shipping. So no longer interested in this deal especially when it looks fishy.

On one picture it says A10 Poland, similar A10 from Bison but not exactly the same is NMTB 30 taper. Maybe this is why sale fell through or there is some other problem. It is rather important to know what taper things are.
 
Last edited:
agree. ad has been lingering around for a while. I also messaged - no reply. I picked up a 1" and 27mm arbor (r8) for vertical mill.
 
Last edited:
He's asking about double what they are worth. I pick up horizontal milling cutters at $10 or less. The 3 arbors are used, and worth about 30$ each, IMHO. I now have more cutters than I will ever use.
 
Yeah cutters are not worth more then 10 each (small cutters that fit in your hand easily are under 5) - unless they are something really special (indexable). I was surprised through with arbors - they seem to cost a lot on eBay - getting one for under 50 USD seems impossible. I tried at least 10 times. I would not mind adding to 1" already have another less used up 1" maybe shorter one this time around.

I seen 7/8 go for close to 100 USD. Must be something for smaller machines, I only have 1" and 1 1/4" cutters with maybe three or four odd ball size.

I easily have more then I will used in two lifetimes - and I am assuming I have at least 50 years left.
 
I try to avoid too much cross posting between here and HobbyMachinist,com. Sorry for the confusion. I purchased them directly from another member.
 
You must log in or register to reply here.
Back
Top