• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

First Project!

Tomc938

Ultra Member
After the excellent advice I received from others on the forum (thanks!) I have a picture of my first project. (below)

Looking forward to stepping up the complexity and precision in future projects. ;o)

Project.jpg
 
I count 4 fingers a thumb. Success! (although I stopped wearing my wedding ring in the shop years ago based on advice from others)
 
The next level is making those come out as blue colour :)
Yeah, I'll be working my way up to that.

And Kevin: I don't wear my ring in the shop, but my wife makes darn sure I wear it out of the shop! ;o)
Made the chips yesterday. Took picture today.

And I also take safety seriously. I know someone who ran a 1/4" side milling cutter between his third and fourth fingers and about half way to his wrist. Pretty bad. Was an old horizontal mill.
 
although I stopped wearing my wedding ring in the shop years ago based on advice from others)

Two schools of though on that:

1) yes, it reduces the chances of getting it caught on something or burning a permanent tattoo where it used to be in case of a short circuit.

2) my better half wants me to keep it on at all times as a visual reminder not to do stupid things in the shop - like getting caught in something or getting electrocuted.

So far I have been going with option 2)…
 
My general rule of thumb for safety is to ask myself: if I read a newspaper article that someone did (fill in the blank) and was hurt or killed, would I say "What kind of an idiot does that?" I don't do it.

I don't want to be that kind of idiot.
 
Two schools of though on that:

1) yes, it reduces the chances of getting it caught on something or burning a permanent tattoo where it used to be in case of a short circuit.

2) my better half wants me to keep it on at all times as a visual reminder not to do stupid things in the shop - like getting caught in something or getting electrocuted.

So far I have been going with option 2)…

I went with 1 years ago reaching under the dash wiring the radio in the 58 Chev my watch touched the cigarette lighter terminal turning it red hot in seconds and frying a inch of my wrist.
 
Back
Top