• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Search results

  1. P

    Motor capacitor procedure

    What is the proper way to replace start/run capacitor's on a motor? Assuming they could still be live I've read: Disconnect power from machine. Remove wiring from cap terminals & immediately tape them to avoid inadvertant jolt while removing. Then on the bench, 'short' them for storage. Sounds...
  2. P

    3 sided precision straight edge

    I see these listed on Ebay (along with other cool stuff from the era). What was the typical use of this triangular profile in machining setups? I doubt for dovetails / scraping because the surfaces have quite a bit of relief & the corners are quite sharp.
  3. P

    Conditioning belts for belt sander

    I have a 1x42 Delta (sanding) belt sander. I didn't realize these abrasive belts were available, kind of like scuff pads which I use all the time. They don't indicate a maximum SFPM. I think the belt thickness should be OK. They say for use on wood & steel (not sure why not aluminum which I do...
  4. P

    Tips/Techniques HH Roberts replacement milling heads

    Has anyone done a retrofit using one of these heads or prior exposure using a machine with one? I'm afraid to ask how much, but it would seem to be a relatively direct bolt-on, 1-stop shopping fix for a junked Bridgeport/clone head and/or to get VFD speed control without a lot of extra...
  5. P

    3DP metal for model engine

    A very talented model engineer on the Model Engine Maker forum is building a 'bar stock' 1:3 scale Mercedes Benz W165 Grand Prix race car engine from the late 1930's. He does use his shop CNC for many parts but interestingly, he designs in 2D not 3D CAD. Anyway, what started as an unrelated side...
  6. P

    CA-AB Surtax metal

    This is not a political thread, its a financial thread. I assume this is the current situation for metal orders originating from USA? So if the prior duty rate was 0% for aluminum or steel, we still have to factor (25% * Value) as an added surtax fee when it clears?
  7. P

    Cad Forum no more

    I noticed my link has not been working past couple days. I think the host or redirect site is 'dezignstuf' ?sp? whereupon it goes to broken link site-no-more land. I saw a recent post on Reddit that the site owner pulled the plug so if true would explain it. If so, too bad. It was quite useful...
  8. P

    Lathe change gears noise

    I posted this on another subject post, but I think worth initiating here as its own theme, so copy-pasted. I don't do a lot of metric threading but the few times I have, I have been greeted with an unnatural chug-A-chug sound, coming from the gears. I chocked this up as introducing new gears...
  9. P

    6mm collet for die grinder

    I mounted up one of my so called 1/4" shank grinding stones & it was obviously loose. I can't even recall where I got it, but I'm got to bet a coffee it was advertised as 1/4" but is likely 6mm in reality. 6mm collets are apparently available buts gasp the price & usually in far away lands. I...
  10. P

    Bench power supply rec

    I'm not a knowledgeable electronics guy but have occasional need for a simple variable power supply. Probably something in this wattage range would be good. Mainly to control voltage to specific values/ranges where certain devices require specific values. Any features to look for or avoid? One...
Back
Top