• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Calgary Area Meetup is set for Saturday July 12th at 10am. The signup thread is here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Search results

  1. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    Contactor update; As mentioned above the lathe would take its sweet time shutting off in fwd, sometimes it was instant but most of the time it was in "danger mode" and not shut off immediately. I pulled the forward contactor as seen in the picture, sanded and cleaned them with contact cleaner...
  2. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    Thank you, I'll look into these possibilities, this is going to be a good learning experience, I'm quite anal about things working properly but lack the skill.
  3. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    when operated in reverse it turns off immediately, I'm no electrician, I'm learning as I go, however I do have family close by who are electricians, I should lean on them instead of me fumbling around, but hey, I have no issue sticking a multi meter on anything.
  4. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    Yes she's a beauty, still had hardended factory grease in the cross side feeds, pulled them apart and cleaned them up, the machine is very tight, everything seem to slide like glass. You could be right, it has been sitting for a few years I think, and the fella I bought it off of only made a...
  5. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    I think I found it, the reverse contactor pops right away, the forward contactor however likes to stick, in the on position, you can push in on the contactor button and it works fine, in and out no hesitation or stickiness, operate it from the controls is a different story.
  6. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    The lathe is all wired up and I have been running through the controls and have noticed a "quirk." The red stop push pull button won't cut the power of immediately, sometimes the power shuts off in a few seconds and other times it takes 30 seconds or so. I have cleaned the contacts and blew...
  7. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    Thank you for the chart and advice, cheers
  8. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    No I don't have a mill, I've ran outa room in my little shop, I'd have to "fire" a couple of tool boxes to fit one in, and I don't even want to think about getting a mill to the back yard, this thing almost killed me as it is.
  9. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    On it ;)
  10. MooseMeat

    Tips/Techniques HOUSE OF TOOLS LD 1236G

    ,Super, thank you
Back
Top