• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Calgary Area Meetup is set for Saturday July 12th at 10am. The signup thread is here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Search results

  1. C

    12 x 36 gearhead lathe

    Left fuse removed. Carriage in forward, controller button depressed, Start button not depressed. On scale Ohm reads 1 Same as above but Start button on front panel is depressed same reading of 1 Carriage in neutral controller button depressed but start button Not depressed reading 0.5...
  2. C

    12 x 36 gearhead lathe

    Same tests as above but LEFT side fuse removed Carriage in forward. Button not depressed Carriage In forward button depressed Carriage in neutral button not depressed Carriage in neutral button depressed
  3. C

    12 x 36 gearhead lathe

    Carriage switch in neutral, right hand fuse removed Same as above but black button is held in
  4. C

    12 x 36 gearhead lathe

    I pulled the right hand fuse to take this reading between 13NO and 14NO, carriage switch to forward Then I had the lathe control lever set to forward and held the black button in
  5. C

    12 x 36 gearhead lathe

    Fuse is installed and wire disconnected from terminal A1
  6. C

    12 x 36 gearhead lathe

    Measured the original CJX1-22 controller (the replacement is CJX1-22/22, not sure if the /22 suffix is the same as the original?) Multimeter set to 200 Ohms, reading 7.0
  7. C

    12 x 36 gearhead lathe

    That’s good advice, solve one problem at a time. I will take that reading this morning and post the results. The original contractor at least allowed me to get the machine running by holding down the black button until the machine started, then I could release the pressure on the button a...
  8. C

    12 x 36 gearhead lathe

    Thank you for your expertise and assistance!! I have a multi meter, have a rudimentary understanding of its use, I restore motorcycles from 60’s - 70’s, all types of Italian makes, some with battery coil ignition, some are energy transfer (flywheel magneto) and even a magneto system. I don’t...
  9. C

    12 x 36 gearhead lathe

    Today I held a jumper across what I think are terminals 95 and 96, the components inside my lathe electrical box are not identical to the Grizzly electrical diagram I have. There was no change, the main power contactor will not hold the black button down while jumping the terminals. I...
  10. C

    12 x 36 gearhead lathe

    Thank you for the reply! I did try and depress the red button in the overload but it just stays in the down position. I will try jumping the 95 and 96 terminals tomorrow. Thanks agsin Jim
Back
Top