• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Search results

  1. D

    wire wheel vs rust converter or media blasting

    VHT Flameproof turned out great!!! This is the results after baking it as per instructions. Thanks for the suggestions :)
  2. D

    wire wheel vs rust converter or media blasting

    Are you referring to VHT rust converter? Which VHT exactly?
  3. D

    wire wheel vs rust converter or media blasting

    There’s also VHT fireproof paint and primer
  4. D

    wire wheel vs rust converter or media blasting

    For overkill. Be doing the turbo housing and down pipe too.
  5. D

    wire wheel vs rust converter or media blasting

    This is great info thanks. Yeah I’m doing a diy ceramic coating.
  6. D

    wire wheel vs rust converter or media blasting

    HI guys seeking to remove rust before painting cast iron parts I'm going to ceramic coat for high-temperature application 1000+ deg talking about engine headers and turbo manifolds. what is the preferred method for rust removal? I've tried the wire wheel but it doesn't get into the little...
  7. D

    YYC - Resurface turbo exhaust manifold

    gasket sealing yeah I got multi-layered stainless OEM Toyota Gaskets that should seal without issue
  8. D

    YYC - Resurface turbo exhaust manifold

    120 grit really polished it up I guess I could have just used 60 grit as it would cut a lot faster and save me a bit of time.. as the sandpaper loosing it’s cutting ability I could of ended up with same results.
  9. D

    YYC - Resurface turbo exhaust manifold

    so first I found a piece of granite that was long enfough to slide the whole manifold on it with keeping it flat. Next I used a razor blade and glass cleaner to clean the granite to make sure there is no dirt and debris on it. Scraping the Granite while keeping the blade flat not to gouge...
  10. D

    YYC - Resurface turbo exhaust manifold

    I did it and it came out great for it within 0.04 pretty flat for my needs
Back
Top