Search results

couple hours from Québec https://www.hobby-machinist.com/threads/small-shop-for-sale-in-northern-new-england-12-000.111815/

sounds good

my Standard Modern uses 30 WT, of course at an industrial supply house its $40 a gallon. Walmart sells a 30WT non detergent gear oil for $4.20 a quart,17 bucks and my gearbox is full. do not use car oil, it keeps the crud suspended in the oil and that of course just goes through those very...

yes ,I just drove intermediate shaft towards chuck,the gear side bearing stayed in place and the shaft pushed the bearing and plug out

morning Jeff, once you get the bearing off the pully shaft use the pully shaft to push oilite bushing out towards chuck ,it will come out with no damage, reverse to install

yes that's going to work out well. Thanks.

love the movable jaw set up, I'll be drilling and tapping (1/2-13 X 5") my Jet saw tonight. jeez after 50 years ya think I would have done that, sometimes the simplest things are the hardest to learn. thanks Dan Here's, a shameless sales plug.... my shop for sale $2.50 a pound I'm 3 1/2 hours...

Jeff, put the new bearings in my SM this is 137 rpm and 1500 rpm, clicking is the tooth fix and the long windup is the RPC ,it sounds a lot worse on the video then at the machine. also on the plus side, on the chuck side of the intermediate shaft, that is a plug in back of the bearing, makes...

Jeff since you and I are replacing bearings in our SM 13" series 2000 I was thinking would it be useful putting a magnet in the bottom of the gearbox to pick up the metal gear particles that could make their way to the bearings especially the TDO spindle bearing ,and maybe once a year take it...

Jeff just saw your video.....HMMMMM.....my SM series 2000 13" sounds just like that in low gears ,now you can understand why I tore it apart.....well still trying to figure out the intermediate shaft removal process