Search results

I wasn't aware there were different frequencies used. I just recently jumped on the ultrasonic bandwagon and bought a cheap 15 liter Creworks brand unit from Amazon. I have been using the Berrymans product for years without an ultrasonic cleaner but soaking time required is at least 24 hours for...

No I haven't but it's on the short list of relatively inexpensive ones to try. I was hoping someone else had used it on cast alloy carb bodies and could post results regarding discoloration. I've been relatively satisfied with the Berrymans Chem Dip but my supply is running low and I'm hoping...

I do that with the small stuff too but the ones I do most often are Rochester Quadrajet carbs that are about 9 inches square and 5 tall. I reuse the solution many times and strain it each time to get the chunks out. Here's a dirty one and a finished one.

Yes the Cascade pods I used clean well but don't play well with aluminum or zinc alloy castings. If you are just cleaning steel they work fine.

I rebuild a lot of carburetors for car/truck and motorcycle applications and I've tried quite a few cleaning solutions. In my experience all the solutions that are acid (citrus) based and the ones that are alkaline (detergent) based will cause damage to the finish on cast zinc, pot metal carb...

Beautiful machine! That thing looks mint!

About 4 times the price that KMS sells it for. https://www.kmstools.com/anchorlube-cutting-paste-16oz.html?gad_source=1&gclid=Cj0KCQjwsJO4BhDoARIsADDv4vBYsnp7uIvgr_C7M8b_R38Nsmlq2uZy9bxPcaNbrwLGQ9rdghZRw9QaAr-FEALw_wcB

KMS in Edmonton carries it too. I use it along for drilling and tapping.

Price reduced to $5500

https://www.kijiji.ca/v-buy-sell-other/calgary/manual-lathe-2004-microweily-ty-1340ghe/1703437442 Same guy who has the First knee mill listed https://www.kijiji.ca/v-tool-other/calgary/first-manual-mill-lc-1-1-2-vs/1703457004