-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
-
Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!
phaxtris's latest activity
-
I just have to say, this is a super cool project. -
All sold. I am just holding 2lbs for one of our members. Did not realize this will be such a hot item!
-
I purchased three of these LED garage lights. They get left on for long periods and get hot enough to cause a fire. Yesterday I was...
-
phaxtris replied to the thread 2 flute or 4 flute.I might hit you up for those at some point, this has been put on the back burner for the moment while i try to get the taylor up and...
-
Would any of these work for you? Both are 7/8” (~22.23mm) and will go into a 7/8” R8 collet. The 4F is non-center cutting; the 2F is...
-
phaxtris replied to the thread 4140 crankshaft modifications - propeller hub build.Update, Found a prop on barnstormers (not the one i ordered), installed, had to make a new front crush plate to accommodate the slightly...
-
-
I got around 100 lbs or so of scrap carbide. Been sorting it for a while. I am hoping to sell some of it for $20 per lbs. The sold EM...
-
phaxtris replied to the thread 2 flute or 4 flute.yea plug socket, i think the thinnest socket i could find on the net was 20.4mm, 22mm seemed to be the next size endmill after 20, the...
-
phaxtris replied to the thread 2 flute or 4 flute.i tried with a 7/8 SD bit to hog the majority out, that worked ok, had to put it in a collet, and i think next time i might try stepping...
-
It's good sand to get, especially if they are still having their annual sand castle competition and it's sunny. (And the wife doesn't...
-
phaxtris replied to the thread Apron repair.Is that where you get the high performance sand from ? That's the sand I want
-
Here's the finished repair. All that is left now is to transfer punch, drill and tap the centre hole at final assembly. Probably...
-
phaxtris replied to the thread Apron repair.Beauty!
-
phaxtris replied to the thread 2 flute or 4 flute.Yea I realize the face of an endmill is not perfectly flat, there is some relief angle, I don't know if that will be a problem or not. I...
-
I think you'll find out that the 22mm cutter won't make a nice 22mm seat. Its going to move all around on you and wallow out the seat...
