-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
-
Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Calgary Area Meetup is set for Saturday July 12th at 10am. The signup thread is here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!
LenVW's latest activity
-
LenVW replied to the thread Zenair CH601HD.Nice work Ryan. I did not know that BOEING was moving their fab operations to Calgary !! Prototype airfoils take many forms. Maybe you... -
^ agreed - they have a great web site that makes getting the right/appropriate abrasive type easy + pretty much all sizes and grits are...
-
@LenVW - Belts are from https://onlinesupply.ca/ and some are sold in lots of 10 or 12 depending on the grit. They have a good range of...
-
No it certainly will not be good, well not until after 4 drinks or more of it then it starts to get really quite good. It then becomes...
-
Ooo how about this
-
That is just one way of damaging a T-slot. The other way is tension overload. Most cast iron is strong in compression but has low...
-
LenVW replied to the thread Whisk(e)y, wine and cheese!.Nice try. I have a few ‘Rec Hockey Buddies’ that have a ‘process’ as well. It might cost me some ice and glasses.
-
Ahh, so "whiskey" is the umbrellla name, the other names refer to the recipe? That makes sense. I knew that about scotch, how you can't...
-
You did a nice job, looks great! I have a cable and turnbuckle on my wall jib crane to help take the strain of heavier loads. Martin
-
Many people here and in other forums are warning about that and I am really worried, on other hand many people did the same type of...
-
LenVW replied to the thread Shop Table top crane.I understand the use of a crane on the mill. Just make sure you have a large enough (3/8-1/2” thk.) plate that will tie to the T Slots...
-
LenVW replied to the thread Tool David's 2x48 grinder build.Hey Mike, Where do you get your belts and do they offer a range of sizes ?
-
I think it’s biggest benefit and usage is where forming and drawing is needed, not structural strength. It’s not a hardening alloy...
-
LenVW replied to the thread Zenair CH601HD.AL3003 ‘H14’ aluminum sheet stands out with a tensile strength range of 17 to 30 KSI (comparative to structural aluminum yield...
-
LenVW replied to the thread Zenair CH601HD.Yeah, the 3003 has a lower yield strength but does have good characteristics when it comes to forming into profiles and complex shapes...
