Storage containers at PA

[6.5 Fan]

Bought a couple of black plastic totes at PA a few weeks ago and have been using them in my loading room. Roughly 12x16x6 deep and stackable $3.99 ea. Will be getting a few more next trip into Saskatoon. Solid bottom so could be used for wet jobs as well as dry.

 

[Scattered Parts]

I use these too. Great for holding parts while you disassemble machinery. Then just pour in some solvent to clean up the parts. Strong, cheap and stackable when not in use

 

[Tom O]

Rats still to big for me I’m looking for one for some blacking fluid from Caswell.

 

[6.5 Fan]

I bought some smaller ones at Canadian Tire a while back, they called them shoe storage containers. Clear plastic and hold liquid but a bit on the fragile side, used them for sorting and storing 223 cases.

 

[Dabbler]

@Tom O they also have narrow ones - the same length but half the width.

For bluing and other ops needing smaller I cut a 4l milk jug down to the height I need. Cheap and effective. Even smaller I use a 1L plastic milk jug. (I get them in B.C. on vacation)

 

[Tom O]

I’ll take a look when the weather warms up a bit the dollar shop near me is basically out of stock, the milk jugs are a good idea. This is my first time dealing with Caswell Canada and had no problems.