I'm posting this ad on behalf of Jim, a buddy from Edmonton. He included a link which directed to Dropbox, but looks like that does not translate here so I pasted the text &attached the pics.
I'm also going to camouflage his contact information a bit to protect him from Wicked Wide Web
email jim[at]johnjr[dot]ca or area code seven-eight-zero four-three-six, six-nine-two-eight
PT
Subject: South Bend Lathe For Sale
I have way too many lathes. Therefore I am selling the following South Bend Lathe.
This lathe is a model CL370ZDM. Light 10" (Based on their 9" machines). 24" centres.
NOTE! This lathe is metric! Yes, South Bend built metric lathes for Canada.
Many of the 9" lathe parts fit this lathe.
The motor is below the lathe in the cabinet.
The chip tray is 22"deep by 50" long. It is also water tight.
It fits very comfortably against a wall.
Comes pretty much as pictured, with a little extra tooling.
Also comes with a Rebuild kit and book, as well as a new belt.
The drawer slides are metal on metal, so very stiff.
There are new ball bearing slides that can be installed in one of the drawers.
A restore would turn this into a magnificent lathe.
I restored the other one of these I have.
It will become my main lathe.
I have a lot of material on my computer about this lathe.
This lathe was originally used in a school environment.
In really great shape, but some student damage where
they ran the carriage into the chuck.
Also a couple small missing parts (handles).
I am asking $3,000.00 for it, as is.
I also have a coolant/flood tank with pump for sale.
It is about 24" x 10" x 12" high, not counting casters.
The Motor is about 1/6 HP, 110 volts, with switch on the motor.
The tank needs 20L to operate.
The hose is equivalent to a garden hose, about 5/8 id.
Offers accepted.
Jim
I'm also going to camouflage his contact information a bit to protect him from Wicked Wide Web
email jim[at]johnjr[dot]ca or area code seven-eight-zero four-three-six, six-nine-two-eight
PT
Subject: South Bend Lathe For Sale
I have way too many lathes. Therefore I am selling the following South Bend Lathe.
This lathe is a model CL370ZDM. Light 10" (Based on their 9" machines). 24" centres.
NOTE! This lathe is metric! Yes, South Bend built metric lathes for Canada.
Many of the 9" lathe parts fit this lathe.
The motor is below the lathe in the cabinet.
The chip tray is 22"deep by 50" long. It is also water tight.
It fits very comfortably against a wall.
Comes pretty much as pictured, with a little extra tooling.
Also comes with a Rebuild kit and book, as well as a new belt.
The drawer slides are metal on metal, so very stiff.
There are new ball bearing slides that can be installed in one of the drawers.
A restore would turn this into a magnificent lathe.
I restored the other one of these I have.
It will become my main lathe.
I have a lot of material on my computer about this lathe.
This lathe was originally used in a school environment.
In really great shape, but some student damage where
they ran the carriage into the chuck.
Also a couple small missing parts (handles).
I am asking $3,000.00 for it, as is.
I also have a coolant/flood tank with pump for sale.
It is about 24" x 10" x 12" high, not counting casters.
The Motor is about 1/6 HP, 110 volts, with switch on the motor.
The tank needs 20L to operate.
The hose is equivalent to a garden hose, about 5/8 id.
Offers accepted.
Jim
