• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Tool Palmgren milling attachment knob modified

Tool
pdentrem

pdentrem

Well-Known Member
Had this vise for years and it is been a pain in cranking the vice up and down. Removed the threaded shaft that is pinned to the knob, drilled and tapped the top for a bolt, pinned it and return to the vice. Now I can use a wrench or whatever without breaking my wrist. It is the simple things that can make life a pain!
Pierre


IMG_9664.jpeg
 
Last edited:
This is what I was cutting in the vise! Telescope part. Could have waited until Monday and used the shops Bridgeport and taken 10% of the time and much simpler set up but I can do this stuff at home if the parts are not too big. This piece is 3” on the edge the cut has been done.
Pierre


IMG_9666.jpegIMG_9665.jpeg
 
You must log in or register to reply here.
Back
Top