https://www.gcsurplus.ca/mn-eng.cfm...so=ASC&sf=ferm-clos&lci=L672084&str=1&lotnf=1
Presently at $972 Listed today.
-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Myford Super7 Bedford, NS
- Thread starter Perry
- Start date
https://www.gcsurplus.ca/mn-eng.cfm...so=ASC&sf=ferm-clos&lci=L672084&str=1&lotnf=1
Presently at $972 Listed today.
Huh. That’s an interesting way to palletize it…
27 Pictures to clarify on the website..,
Super 7 with a gearbox , on a factory stand,
Looks nicer than mine!
skippyelwell
Well-Known Member
That is in nice shape, well made machine, if Myford had only made a 10", that would be a lathe worth having.
Already $972. It’s a Super 7 with a quick change gearbox but not new enough to have the power cross slide.
One chuck, 4 way tool post and a keyless chuck but no sign of other accessories. Casters off something else.
Would be a good quality entry tool.
I already have my S7 but it’s almost tempting to drive over and look at it just to see how they operate. If anyone in parts west is tempted I could be your eyes.
D.
One chuck, 4 way tool post and a keyless chuck but no sign of other accessories. Casters off something else.
Would be a good quality entry tool.
I already have my S7 but it’s almost tempting to drive over and look at it just to see how they operate. If anyone in parts west is tempted I could be your eyes.
D.
Last edited:
TorontoBuilder
Ultra Member
I know right. That is about as dumb as only taking photos of the back of a lathe
The folks that work in receiving and disposal sections are pretty good at keeping track of stuff, and the paperwork involved, but are by no means knowledgeable about all the products that they handle.
One of the Supply Techs that I worked with, told me his job would be a lot easier, if he didn't have enough imagination to see the possibilities for all the stuff that went to waste...