Logan Lathe in Edmonton Area $2000

[Hacker]

This is on Market Place: Logan 200 10" x 21" metal lathe in excellent condition. Comes with a 3 jaw scroll chuck, 4 jaw independent chuck, face plate with dogs, steady rest, change gears, live and dead centers and a set of tool holders. Lathe is in excellent condition and runs extremely smooth and quiet. $2000

https://www.facebook.com/marketplac...4455007990881189888","ftmd_400706":"111112l"}

 

[Susquatch]

Don't forget it has a tailstock!

And a mounted tire too!

 

[Former Member]

They are nice lathes, I only upgraded because of internal spindle dia.

 

[Tom O]

He must have done something to the drive isn’t that the pulleys sitting there?

 

[JustaDB]

And a mounted tire too!

Everybody needs a spare tire to go w/ their lathe. Unfortunately, mine's around my waist...

 

[YotaBota]

He must have done something to the drive isn’t that the pulleys sitting there?

I checked the book for the 200 series and they have a 2 step pulley on the drive end. It's different because the motor pulley is a v-belt and the countershaft pulley has a flat profile.

 

[Former Member]

Absolutely correct.

Website for the Logan Actuator Co.

Logan Actuator Co. - Lathe Department

I have an original manual somewhere for the model 200.

 

[YotaBota]

I found a copy of the 200 manual somewhere on line and was able to download a copy. I have the manual for the model 400 as well, paid for that one.