King 1022 $1900

[YotaBota]

One for the BC gang.

King 1022 Metal Lathe - tools - by owner

King 10” dia x 22” long Comes with all you see: - Change gears - Steady rest - travelling rest - live / dead center - insert tooling holders - faceplate - wooden stand Not used a lot and need the...

abbotsford.craigslist.org

 

[YYCHM]

Threaded spindle.... Interesting....

 

[YotaBota]

By the pictures it looks in good condition and the price compared to new isn't to bad.

 

[gerritv]

Spindle is 1.75-8, back plates can be had from LMS.
I paid $1200 a few years ago for mine, but still don't have the steadies.
The threaded spindle is not a problem, they provide 2 locking dogs to prevent the chuck coming off if using it in reverse. Never had a problem using it that way.

Gerrit

 

[YYCHM]

Spindle is 1.75-8, back plates can be had from LMS.
I paid $1200 a few years ago for mine, but still don't have the steadies.
The threaded spindle is not a problem, they provide 2 locking dogs to prevent the chuck coming off if using it in reverse. Never had a problem using it that way.

Gerrit

Post a pic of this locking dog please..........

 

[gerritv]

Mounts using M6 SHCS into the chuck. There is a pair, on opposing sides. I haven't drilled/tapped my 5C chuck yet for this.

Gerrit

 

[YYCHM]

Mounts using M6 SHCS into the chuck. There is a pair, on opposing sides. I haven't drilled/tapped my 5C chuck yet for this.

Gerrit

The chuck flange has a hole through it????

 

[gerritv]

Yes, the M6 goes into the chuck, to tighten the clamp. (And no, the bolt doesn't go into the spindle thread, it is just long enough to force the clamp into the groove on the spindle)