• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

#2

W

wmetfab

Well-Known Member
These are the measuring insturments. Everything starret or M&W. 3 sets of radius gauges. Thread pitch gauges, Rule stops.
A very cool set of V blocks

The hold down clamp does not fit the v blocks or another starret set i have.
The horizontal thread goesxside to side. Anyone know what this is for?
There is also a small gripper with a slot, i think it fits a tiny rule or thread gauge.
 

Attachments

  • 20241202_224138.jpg
    20241202_224138.jpg
    1.4 MB · Views: 16
  • 20241202_224514.jpg
    20241202_224514.jpg
    1.9 MB · Views: 15
  • 20241202_224832.jpg
    20241202_224832.jpg
    1.7 MB · Views: 13
  • 20241202_224116.jpg
    20241202_224116.jpg
    1.9 MB · Views: 15
  • 20241202_224340.jpg
    20241202_224340.jpg
    1.1 MB · Views: 16
  • 20241202_224816.jpg
    20241202_224816.jpg
    1,009.9 KB · Views: 17
  • 20241202_224418.jpg
    20241202_224418.jpg
    1.2 MB · Views: 17
On the V block horizontal screw, repeating an answer from Forrest Addy, the most knowledge person on machining, metal working and machine tool reconditioning I've encountered, its a built in jack screw for use when the block is on its side.
 
You must log in or register to reply here.
Back
Top