Brad Wiens
New Member
I have a Trademaster 13” drill press . It fell over and broke handle . Anyone know where I could purchase a replacement ??
-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Trademaster drill press parts
- Thread starter Brad Wiens
- Start date
Make one! If you have a lathe it's easy peasy. If not, it's not hard to do with a bar and a threading die. You can get balls on Ali or at busy bee.
Lightning Rod
New Member
Brad
are you referring to the quill feed hub handles or the table elevation crank handle?
The Trademaster brand came out of the same factory in China as probably 20 other brands. Parts interchangeability is probably very high.
Bring the broken part to your local hardware store, BusyBee etc and try to match it up
Amazon is good also.
good luck
are you referring to the quill feed hub handles or the table elevation crank handle?
The Trademaster brand came out of the same factory in China as probably 20 other brands. Parts interchangeability is probably very high.
Bring the broken part to your local hardware store, BusyBee etc and try to match it up
Amazon is good also.
good luck
Brad Wiens
New Member
I don’t have a lathe.
thank you
Hence my comments above about making a handle without a lathe. It's totally doable.
If you prefer to buy one, find out what thread it needs to be and then shop for that.