• Spring 2024 meetup in Calgary - tentative date Saturday, April 20/2024. Other regions are also discussing meet ups. If you want one in your area get going on organizing it! discussion
  • We are having email/registration problems again. Diagnosis is underway. New users sorry if you are having trouble getting registered. We are exploring different options to get registered. Contact the forum via another member or on facebook if you're stuck. Update -> we think it is fixed. Let us know if not.
  • Spring meet up in Ontario, April 6/2024. NEW LOCATION See Post #31 Discussion NEW LOCATION

New project

glenhw

Member
20220809_210958.jpg 20220809_211010.jpg i started a new project my dad wanted a face plate for hes very old wood lathe i used a pice of 1/2in aluminum he had a 5/8 IN taper hub that fits on the shaft i am going to use 2 1/4 by 20 socket head bolts to clamp the taper he wants a 4in one as well so i made a pin the fits the 1/2 in hole in thenplate as well as the 5/8 in the hub so it can be perfectly alined when bolting it up so in theory it should be lined up and balanced the same as when it was turned
 

Attachments

  • 20220809_211008.jpg
    20220809_211008.jpg
    311.5 KB · Views: 5
Top